Installation guide

Eco Gards are quick and easy to install - just follow the simple steps below.

Place mat around plant

1

Place wool mulch mat around the plant.

Insert stakes into ground

2

Insert 2 stakes into
diagonally opposite holes in the mat. Push or bang about 1/3 (25cm) into the ground. Stakes should angle slightly outwards. A mallet helps to bang the stakes in.

Thread stakes through bottom of Eco Gard

3

With the tabs at the top and holding bottom of Eco Gard,
insert stakes through gap
between the bamboo hoop and the fabric.  

Slide Eco Gard over stakes

4

Slide the Eco Gard down the stakes.

 Insert stakes through the gap between the bamboo hoop and the fabric at top

5

Insert stakes through the gap between the bamboo hoop and the fabric at top, and pull the tab down tightly.

Completed Eco Gard

6

All done! Your plant is now
protected by an Eco Gard.